Muas M.
Politeknik Ujung Pandang

Published : 2 Documents
Articles

Found 2 Documents
Search

Pengaruh Getaran Permesinan Terhadap Kekasaran Permukaan Pada Mesin VMC-200 M., Muas
Jurnal Teknik Mesin SINERGI Tahun ke-6, No. 1 (2008)
Publisher : Jurnal Teknik Mesin SINERGI

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Tujuan yang ingin dicapai dalam penelitian ini, yakni mengetahui pengaruh getaran permesinan terhadap kekasaran permukaan hasil permesinan pada mesin VMC-200, serta hubungan parameter potong utama terhadap kekasaran permukaan. Penelitian ini dilakukan di Laboratorium CNC, Mekanik, dan Bengkel Mekanik Jurusan Teknik Mesin, Politeknik Negeri Ujung Pandang selama enam bulan. Penelitian ini dilakukan dengan empat tahap, yakni: tahap persiapan, pemotongan, pengujian, dan tahap analisis. Spesimen yang telah disiapkan (AlMgSi) dipotong-potong menjadi ukuran 18x18x70 mm. Selanjutnya dilakukan proses permesinan untuk menguji amplitudo getaran dan kekasaran permukaan spesimen. Pengujian amplitudo getaran mengunakan vibrocord sedangkan pengujian kekasaran permukaan menggunakan surface tester. Hasil penting yang diperoleh dalam penelitian ini, yakni semakin meningkatnya amplitudo getaran semakin meningkat pula nilai kekasaran permukaan hasil permesinan, peningkatan putaran pahat potong dan gerak insut mengakibatkan penurunan kekasaran permukaan. Jika kedalaman potong dan amplitudo getaran meningkat maka akan mengakibatkan kekasaran permukaan meningkat.
STUDY OF EXPERIMENTAL ON USING OF THE VIBRATION SIGNAL TO DETECT THE SURFACE ROUGHNESS OF MACHINING RESULTS WITH USING OF PARAMETRIC EQUATIONS M., Muas; Rasyid, Syaharuddin
Teknik Mesin "TEKNOLOGI" Vol 15, No 1 Apr (2012)
Publisher : Universitas Negeri Makassar

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

The research carried out aimed to produce two model / equation, which are the surface roughness and the machining vibration.  The generated machining vibration model can be used as substitution parameter to predict surface roughness.Workpiece material used was aluminum-alloy. Aluminum alloys was processed on CNC machines of TU-3A. The first phase of the study (first year), the focus on the synthesis and study of theoretical models to determine the optimum level of accuracy that can be achieved from the model.Design and research methods are divided into several stages. Starting from preparation, cutting parameter settings, machining process, measurement, until to processing and data analysis. Based on the cutting parameters that have been designed before it, then the machining process is performed to obtain the data. Data obtained from the measurement of machinery vibration and surface roughness. Overall, the amount of data obtained from the machining process as many as 125 rows of data. Data processing done to obtain surface roughness and machining vibration equations coupled with the accuracy of each model. Model produced in this study were 5 (five) model, both of surface roughness and machining vibration. But from 5 (five) models,  only selected 1(one) model which has an optimum level of accuracy. In this study produced each 1 (one) model of surface roughness and 1(one) model of machining vibration couple with the accuracy of each model.The resulting model for surface roughness has a level of accuracy (theoretically) of 83,533%. While the model generated for machining vibration has the highest accuracy (theoretically) of 82,188%. Keywords: Spindle speed, feedrate, depth of cut, vibration machining, and surface roughness.