Articles

Found 19 Documents
Search

PEMETAAN SMK: STUDI EKSPLORATIF DI PROVINSI DIY, KALSEL, DAN KALTIM Munadi, Sudji
Jurnal Kependidikan: Penelitian Inovasi Pembelajaran Vol 40, No 1: Mei 2010
Publisher : LPPM UNY

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21831/jk.v40i1.514

Abstract

This research aims to describe (1) the latest data about the existence of vocational senior high school that consists of the numbers of school, the skill program, the numbers of learning group, and the numbers of productive training teacher: (2) the comparison of the productive training teacher with the skill program and the learning group. This research was conducted by using survey technique. The population which also eshtablished as the sample of this research were all of the head of the Branch Office of Education in the provinces region Special Region of Yogyakarta (DIY), South Kalimantan, West Kalimantan, and all of the headmasters of SMK in those provinces. The data were collected by using documentation and questionnaire technique. The collected data were analyzed by using the quatitave descriptive technique and processed by SPSS 12 program. The result of this research showed that there was difference of SMK numbers between the numbers of SMK that recorded in 2008 (409 schools) and the numbers of SMK that observed in 2009. There were 423 SMKs in DIY, South Kalimantan, and East Kalimantan. 152 SMKs of them were public shool and the other 271 SMKs were private schools. The numbers of skill program were 1142 programs that located in DIY:  491, South Kalimantan: 198, and East Kalimantan: 453. The numbers of learning group = 4998 groups, for DIY 2309 groups, South Kalimantan 785 groups and East Kalimantan 1904 groups. The numbers of productive training teacher were 16069 people, DIY 7450 people, South Kalimantan  2459 people and East Kalimantan 5160 people. The comparison between teacher and skill program was 14,6 : 1, between teacher and learning group was 3,2 : 1. The skill program dominantly handled were Automotive Mechanical Engineering,  Networks and Computer Technology, Accountancy, Multimedia, Marketing, and Office Administration. In addition, especially for DIY, Clothing Engineering was dominant skill program as well
MODEL PENGUATAN SOFT SKILLS DALAM PEWUJUDAN CALON GURU KEJURUAN PROFESIONAL BERKARAKTER Wagiran, Wagiran; Munadi, Sudji; Widodo, Syukri Fathudin Achmad
Jurnal Kependidikan: Penelitian Inovasi Pembelajaran Vol 43, No 1: Mei 2013
Publisher : LPPM UNY

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21831/jk.v43i1.2258

Abstract

Tujuan umum penelitian ini untuk menghasilkan model teoretis penguatan soft skills dengan tujuan khusus untuk mendapatkan gambaran profil aktual soft skills, mendapatkan gambaran pembekalan soft skills, dan merumuskan model teoretis penguatan soft skills calon guru kejuruan profesional berkarakter. Penelitian ini dipecahkan melalui desain R&D. Data dikumpulkan dengan teknik observasi, wawancara, dan dokumentasi. Analisis data dilakukan secara kualitatif dan kuantitatif. Hasil penelitian menunjukkan bahwa pertama, terdapat 68 dimensi soft skills yang diklasifikasi ke dalam lima dimensi utama, yakni jujur dan dapat dipercaya, tanggung jawab, disiplin, keteladanan, serta ketaatan terhadap etika; kedua, keunggulan calon guru adalah percaya diri, materi pembelajaran mutakhir, pemanfaatan IT, dan ketrampilan mengajar, sedangkan kelemahannya tampak dalam komunikasi interaktif dengan siswa, kurangnya disiplin, tanggung jawab, serta komunikasi dan inovasi; ketiga, pola penanaman soft skills dilakukan terhadap enam unsur, yakni kurikulum, pembelajaran, iklim akademik, kegiatan kemahasiswaan, kepemimpinan dan manajemen, serta hubungan sinergis dengan pemangku kepentingan, khususnya dunia usaha/industri
PENGEMBANGAN MODEL PENGUATAN SOFT SKILLS DALAM MEWUJUDKAN CALON GURU KEJURUAN PROFESIONAL BERKARAKTER Wagiran, Wagiran; Munadi, Sudji; Fathudin, Syukri
Jurnal Kependidikan: Penelitian Inovasi Pembelajaran Vol 44, No 1: Mei 2014
Publisher : LPPM UNY

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21831/jk.v44i1.2195

Abstract

Tujuan penelitian ini adalah menghasilkan model penguatan soft skills dalam mewujudkan calon guru kejuruan profesional berkarakter. Penelitian  dirancang dengan menggunakan  pendekatan  Researchand  Development selama dua tahun. Sumber data dalam penelitian ini meliputi kepala SMK, guru, mahasiswa, dan ahli pendidikan. Data dikumpulkan dengan teknik observasi, wawancara, dan dokumentasi. Analisis data dilakukan secara deskriptif kuantitatif. Hasil penelitian meliputi hal-hal berikut ini. Pertama, rumusan model penguatan soft skills calon guru difokuskan kepada dua mata kuliah utama, yakni pengajaran mikro dan PPL dengan model integratif. Kedua, urgensi aspek hard skills dan soft skills berada dalam kategori baik/penting dengan pencapaian rerata di atas  rerata kriteria, dan pencapaian skor masing-masing 88,2%, dan 87,11%. Ketiga, kemampuan aspek hard skills dan soft skills berada dalam kategori baik/penting dengan pencapaian rerata atas rerata kriteria,dan pencapaian skor masing-masing 72,81%, dan 74,11% dalam kategori cukup tinggi
ANALYSIS OF THE QUALITY OF TEST INSTRUMENT AND STUDENTS’ ACCOUNTING LEARNING COMPETENCIES AT VOCATIONAL SCHOOL Kurniawan, Nur Ichsanuddin Achmad; Munadi, Sudji
Jurnal Penelitian dan Evaluasi Pendidikan Vol 23, No 1 (2019): June
Publisher : Graduate School, Universitas Negeri Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21831/pep.v23i1.22484

Abstract

The study is aimed at describing: (1) characteristics of the items of the national examination try-out test of the accounting subject matter in the 2015/2016 academic year on classical test theory and modern test theory; and (2) classification of students? masteries in the learning of accounting. The study is explorative research. Analyses are conducted using the classical and modern test theories for item characteristics and descriptive quantitative for students? masteries in accounting using the test set for the national examination try-out in the 2015/2016 academic year. A total of 414 students do the Package A test. Results show that (1) based on the classical test analyses, a number of 11 items (27.5%) belong to the ?easy? category, 22 items (55%) ?medium? category, and 7 items (17.5%) ?difficult? category allowing a total of 19 (47.5%) to be categorized as good items; meanwhile, on the modern-theory analyses, a total of 34 items (85%) belong to the ?good? category. (2) Around 38% of the students have competencies of the medium and low categories. Most students have difficulty in answering questions of the higher-order thinking levels.  
PENINGKATAN MOTIVASI DAN HASIL BELAJAR PADA MATA PELAJARAN PEMOGRAMAN DASAR MENGGUNAKAN MODUL DI SMKN 2 SUMBAWA Pebruanti, Lies; Munadi, Sudji
Jurnal Pendidikan Vokasi Vol 5, No 3 (2015): November
Publisher : ADGVI & Graduate School of Universitas Negeri Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21831/jpv.v5i3.6490

Abstract

Penelitian ini bertujuan: (1) untuk meningkatkan motivasi belajar siswa, dan (2) untuk meningkatkan hasil belajar siswa agar tercapainya ketuntasan klasikal pada mata pelajaran pemograman dasar siswa kelas X jurusan Multimedia di SMKN 2 Sumbawa. Penelitian ini merupakan penelitian tindakan kelas yang menggunakan model Kemmis dan Mc. Taggart (Perencanaan, pelaksanaan, observasi, dan refleksi). Subjek dalam penelitian ini adalah siswa kelas X Multimedia SMKN 2 Sumbawa, NTB yang berjumlah 34 orang melibatkan guru dan seorang observer. Data motivasi dan nilai sikap diambil menggunakan angket. Data keterlaksanaan proses pembelajaran diambil dengan menggunakan lembar observasi. Data nilai pengetahuan dan unjuk kerja diambil menggunakan skala penilaian yang dilengkapi dengan rubrik. Teknik analisis data motivasi dan nilai sikap menggunakan analisis deskriptif kemudian digolongkan kedalam skor baku untuk mengkategorisasikan motivasi belajar dan nilai sikap. Hasil penelitian ini menunjukkan bahwa: (1) pengunaan modul pembelajaran dapat meningkatkan motivasi belajar siswa. (2) penggunaan modul dapat meningkatkan hasil belajar (nilai sikap, nilai pengetahuan dan praktik). IMPROVING MOTIVATION AND LEARNING OUTCOMES IN BASIC PROGRAMMING USING MODULES IN SMKN 2 SUMBAWAAbstractThis research aims to: (1) improve student?s motivation and (2) improve student?s learning outcomes to achieve the classical completeness on basic programming course in class X Multimedia majors at SMKN 2 Sumbawa. This research is a classroom action research that uses Kemmis and Mc. Taggart (planning, implementation, observation, and reflection) models. Subjects in this study is the tenthgrade of Multimedia students at SMKN 2 Sumbawa NTB amounting to 34 people involving teachers and an observer. The motivation data and value of attitude were taken using a questionnaire and the data of learning process was taken using observation sheets. The knowledge and performance values were taken using a assessment scale which was equipped with a rubric. The data analysis technique of motivation and value of attitude used descriptive analysis and were classified into raw scores to categorize the value of learning motivation and attitudes. The result of this research are as follows: (1) Using learning module can improve student?s motivation. (2) Using learning module to improve learning outcomes (attitudes, knowledge and practices).
PENGARUH STRATEGI PEMBELAJARAN STUDENT-CENTERED LEARNING DAN KEMAMPUAN SPASIAL TERHADAP KREATIVITAS MAHASISWA Ardian, Aan; Munadi, Sudji
Jurnal Pendidikan Teknologi dan Kejuruan Vol 22, No 4 (2015): (Oktober)
Publisher : Faculty of Engineering, Universitas Negeri Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21831/jptk.v22i4.7843

Abstract

This study aims at investigating the difference of creativity between the students treated with the Student-Centered Learning (SCL) strategy and the students treated with the Direct Learning strategy. It was a quasi-experimental study employing the non-equivalent control group design. It was conducted using the 2x2 factorial design. The research population were 40 students attending the course of Fabrication Construction Design. The results of the study showed that (1) The creativity of the students using the SCL strategy attained mean scores of 42.65, higher than the students using the Direct Learning strategy with mean scores of 39. (2) The students with high spatial ability using the SCL strategy attained mean scores of 49, higher than the students using the Direct Learning strategy with mean scores of 36.3. (3) The students with low spatial ability using the SCL strategy attained mean scores of 36.3, lower than the students using the Direct Learning strategy with mean scores of 41.70. (4) There was an interaction between the learning strategy and the spatial ability in terms of the effect on the creativity.
PENGEMBANGAN MODUL PEMBELAJARAN KONSTRUKTIVISTIK KONTEKSTUAL BERBANTUAN KOMPUTER DALAM MATADIKLAT PEMESINAN Munadi, Sudji
Jurnal Pendidikan Vokasi Vol 1, No 1 (2011): Februari
Publisher : ADGVI & Graduate School of Universitas Negeri Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21831/jpv.v1i1.5709

Abstract

DEVELOPING OF COMPUTER ASSISTED CONTEXTUAL CONSTRUCTIVE LEARNING MODULE IN THE MACHINE TRAININGThis research was aimed at investigating constructivist learning model for machining process. Interactive Computerised Module of constructivist teaching principle has been developed at the first year of research. This further research was aimed at implemention of the module and its effectiveness. This research was carried out by means of Research and Development. Data was analysed descriptively. The research investigated, that: module have satisfied feasibility both in theoretical and empirical aspects. There are three roles of module: (1) as media, (2) as supporting media in practice, (3) as interactive and individual learning. The implementation of module into teaching and learning should not in uniform manner within different teachers and facitlities for vocational schools.
ORIENTASI PILIHAN KARIR OLEH MAHASISWA D-3 PROGRAM STUDI TEKNIK MESIN FT UNY Munadi, Sudji
Jurnal Pendidikan Teknologi dan Kejuruan Vol 16, No 2 (2007): Oktober
Publisher : Faculty of Engineering, Universitas Negeri Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21831/jptk.v16i2.7636

Abstract

Penelitian ini bertujuan untuk mengetahui: (1) bidang-bidang karir yang banyak diminati mahasiswa D-3; (2) bidang karir yang kurang diminati oleh mahasiswa D-3 Program Studi Teknik Mesin Fakultas Teknik Universitas Negeri Yogyakarta. Penelitian ini menggunakan metode survei. Populasi penelitian adalah semua mahasiswa D-3 Program Studi Teknik Mesin FT-UNY angkatan tahun 2005, 2006 dan 2007 yang berjumlah 359 orang. Jumlah sampel ditetapkan dengan menggunakan pedoman dari Krecjic dan Morgan untuk taraf kesalahan 5% yaitu 180 orang. Pengambilan sampel menggunakan metode stratified proporsional random sampling dengan proporsi masing-masing strata sebesar 50%. Pengambilan data dilakukan dengan menggunakan angket yang berisi ?A Self-Inventory for Career Planning?. Analisis data dilakukan dengan menggunakan analisis deskriptif dalam bentuk presentase. Hasil penelitian menunjukkan: (1) bidang-bidang karir yang banyak diminati oleh mahasiswa D-3 teknik mesin FT-UNY adalah: karir dalam bidang pekerjaan manajerial (managerial work), pekerjaan yang memerlukan kreativitas (creative work), pekerjaan mekanistik (mechanical work), dan Pekerjaan yang berhubungan dengan fisik, banyak menggunakan tangan (physical work). Bidang-bidang karir yang kurang diminati oleh mahasiswa D-3 teknik mesin FT-UNY adalah karir dalam bidang pekerjaan yang menangani pemeliharaan dokumen (clerical work), pekerjaan yang banyak berhubungan dengan orang lain (interpersonal work), pekerjaan di bidang baca dan tulis (written work) dan pekerjaan verbal/lisan (oral work).
ANALISIS DAYA PREDIKSI TES SELEKSI MASUK PROGRAM D3 REGULER FAKULTAS TEKNIK UNIVERSITAS NEGERI YOGYAKARTA TERHADAP PRESTASI AKADEMIK MAHASISWA D3 TEKNIK FT UNY Munadi, Sudji
Jurnal Pendidikan Teknologi dan Kejuruan Vol 18, No 2 (2009): (Oktober)
Publisher : Faculty of Engineering, Universitas Negeri Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21831/jptk.v18i2.9326

Abstract

Penelitian ini bertujuan untuk mengetahui: (1) hasil tes seleksi masuk program D3 Reguler Fakultas Teknik Universitas Negeri Yogyakarta (FT UNY) dan prestasi akademik mahasiswa D3 FT UNY yang lulus tes seleksi dan (2) daya prediksi tes seleksi terhadap prestasi akademik mahasiswa D3 FT UNY. Penelitian ini dilaksanakan di FT UNY dengan menggunakan teknik analisis dokumen. Populasi penelitian ini adalah mahasiswa baru program D3 FT UNY tahun 2005 yang diterima melalui tes seleksi sebanyak 219 orang. Semua populasi dijadikan sampel penelitian. Data penelitian diambil dari dokumen hasil tes seleksi masuk dan pencapaian indeks prestasi semester I pada tahun akademik 2005/ 2006. Data yang terkumpul dianalisis secara deskriptif dan korelasional dengan menggunakan bantuan program SPSS 10. Berdasarkan analisis data diperoleh hasil penelitian Sebagai berikut: (1) rerata skor hasil tes seleksi masuk program D3 reguler= 261, 733 masuk dalam kategori baik, (2) rerata indeks prestasi yang dicapai mahasiswa angkatan 2005/2006= 2,711 masuk dalam kategori baik dan (3) tes seleksi masuk program D3 Reguler tahun 2005 memiliki korelasi positif terhadap pencapaian indeks prestasi mahasiswa dengan koefisien korelasi sebesar 0,68. Dengan kata lain, skor tes seleksi masuk memberikan kontribusi sebesar 46,24% terhadap capaian indeks prestasi. Artinya tes seleksi masuk program D3 Reguler FT UNY memiliki daya prediksi yang cukup baik. Oleh karena itu, tes seleksi masuk ini dapat digunakan sebagai salah satu cara untuk seleksi penerimaan mahasiswa baru FT UNY dalam rangka mendapatkan calon mahasisawa yang berkualitas.
Factor analysis to identify the dimension of Test of English Proficiency (TOEP) in the listening section Retnawati, Heri; Munadi, Sudji; Al-Zuhdy, Yosa Abduh
REiD (Research and Evaluation in Education) Vol 1, No 1 (2015): June
Publisher : Universitas Negeri Yogyakarta (Yogyakarta State University)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21831/reid.v1i1.4897

Abstract

This research is aimed at identifying the amount of the ability dimensions contained in the Test of English Proficiency (TOEP), particularly in the listening section. This study is an explorative descriptive quantitative research. The data of the study are the responses of the TOEP participants in the whole Indonesia in 2010, in some TOEP components. The participants are grade IX students of senior high schools. The collected data were gained from the data documentation of the Diretorate of Senior High Schools Founding of the National Education Ministry, Jakarta. The data analysis for identifying the dimension was done by implementing exploratory and confirmatory factor analysis. The exploratory factor analysis was done by using SPSS computer program. The result of the research shows that of the seven sets of listening which were analyzed, all of them contain listening dominant dimension if they are analyzed using graphics method, explainable variance, and Eigen value ratio.