Found 2 Documents
Journal : TELKOMNIKA Telecommunication, Computing, Electronics and Control

Performance enhancement of maximum power point tracking for grid-connected photovoltaic system under various gradient of irradiance changes Syah, Mario Norman; Subiyanto, Subiyanto
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 17, No 4: August 2019
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1127.149 KB) | DOI: 10.12928/telkomnika.v17i4.10335


This paper presents a new variant of smart adaptive algorithm of Maximum Power Point Tracking (MPPT) in the photovoltaic (PV) system. The algorithm was adopted from Modified Perturb and Observe (MP&O). The smart adaptive MPPT is used to search Maximum Power Point (MPP) of the PV system under various irradiance changes. This algorithm incorporates information of current change (ΔI), maximum operating point margin and dynamic perturbation step to prevent MPPT diverging away from the MPP and minimize the steady state oscillation. The smart adaptive MPPT algorithm performance is compared with the dI-P&O and conventional P&O to prove its effectiveness. The comparison is performed under the various gradient of irradiance change. It was found that, for all the tests, the smart adaptive algorithm scheme improve the tracking efficiency under various gradients of irradiance changes and increase the efficiency of extraction power from PV system.
Modified SEPIC Converter Performance for Grid-connected PV Systems under Various Conditions Aprilianto, Rizky Ajie; Subiyanto, Subiyanto; Sutikno, Tole
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 16, No 6: December 2018
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1274.822 KB) | DOI: 10.12928/telkomnika.v16i6.10148


Step-up converter is widely used to increase DC voltage level on PV systems either off-grid or grid connected. One of the step-up converters often used in PV systems is SEPIC converter. To improve its performance, many SEPIC converters have been modified. However, performance on various conditions has not been further investigated. In this study, the modified SEPIC converter was investigated under various change conditions for grid-connected PV applications. This converter was modelled and simulated using PSIM software. The modified SEPIC converter received input from PV array 15 kWp, and its output was connected to the three-phase inverter with grid and load. The irradiance level and ambient temperature were varied to test its performance and compared to Boost converter and SEPIC converter. For all tests, the performance of modified SEPIC converter was better than other step-up converters because it was able to rectify the quality of output voltage and more efficient.