cover
Contact Name
Sagita Rochman
Contact Email
sagita@unipasby.ac.id
Phone
+6281252569967
Journal Mail Official
jurnalbest@unipasby.ac.id
Editorial Address
Jl. Dukuh Menanggal XII, Surabaya, 60234, Jawa Timur, Indonesia
Location
Kota surabaya,
Jawa timur
INDONESIA
Best
ISSN : 27152871     EISSN : 27145247     DOI : https://doi.org/10.36456/best.vol3.no1
A Journal that contain Applied Electrical, Science & Technology. Published twice a year, in March and September. P-ISSN: 2715-2871(print), and E-ISSN: 2714-5247 (online).
Articles 32 Documents
Temperature Control System on Aquascape using On-Off Control Widodo; Setiawan, Rudi
BEST Vol 3 No 1 (2021): BEST
Publisher : Program Studi Teknik Elektro Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol3.no1.3541

Abstract

Every human being has a feeling of saturation in carrying out his daily activities. There are many ways you can do to get rid of boredom, one of which is by doing hobbies that we like. Currently there are many hobbies that can be done, one of which is a hobby of decorating an aquarium (Aquascape) by using stones, wood, sand and using water plants. Which is starting to be of interest to various circles of society. For Aquascape owners, sometimes their daily activities are busy. In fact, these other activities can take up to days. The solution to the problem of fan negligence when maintaining the Aquascape is to build an aquarium system that can adjust the lighting periodically as needed, stabilizing the water temperature in the aquarium
Arduino Based Design of Horizontal Wind Power Generator for Coastal Road Lighting Rochman, Sagita; Taufiq Irvan Efendy, Mochamad
BEST Vol 3 No 1 (2021): BEST
Publisher : Program Studi Teknik Elektro Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol3.no1.3540

Abstract

Increasing energy demand, depleting fossil fuel reserves, and environmental concerns have put renewable energy sources in the spotlight in Indonesia. Wind energy in particular, which has received a lot of attention because it is inexhaustible and friendly to the environment. The main problem of the two generating systems is not continuously available. Wind turbines are the main medium used to convert wind energy into electrical energy. A good wind turbine design will determine the performance of a wind power plant (PLTB). This tool is to control the electric power generated from the wind generator, the electric power generated from the generator will be measured the current and voltage. The way the tool works when the generator wheel rotates, the generator will produce electrical power which has been connected to the charger controller before the electric power is stored in the battery. The use of electric power from the battery will be converted using an inverter to convert the DC current to AC. This research was conducted on wind turbine generators in the use of coastal street lighting as objects to generate electric power in order to reduce the need for PLN electricity. This research was conducted on wind turbine generators in the use of coastal street lighting as objects to generate electric power in order to reduce the need for PLN electricity. The generator will generate electrical power which has been connected to the charger controller before the electric power is stored in the battery. The use of electric power from the battery will be converted using an inverter to convert the DC current to AC. This research was conducted on wind turbine generators in the use of coastal street lighting as objects to generate electric power in order to reduce the need for PLN electricity
Design of Attendance Recording System for Pilkades Participants Using Web-Based RFID (E-KTP) Atmiasri; Andris Kosmono, Eko
BEST Vol 3 No 1 (2021): BEST
Publisher : Program Studi Teknik Elektro Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol3.no1.3539

Abstract

The development of information technology has now been widely used to facilitate, accelerate, and streamline work. The recording system that is still being applied is a type of recording using a manual system using paper media and is inefficient when viewed from a time perspective, recapitulating attendance data and the accuracy or authenticity of the data presented. There is still a frequent habit of voting in the village head elections or not being present at the voting process. Contrary to these problems, this research has developed a recording system using RFID (Radio Frequency Identification) technology. RFID will use sensors to read data. The use of RFID which can make it easier for KPPS officers at TPS. The use of both active and passive RFID technology is able to help record and move data in KPPS, Use of RFID technology, data will be recorded only by passing through a sensor reader on the device, thus the attendance data present by pilkades participants will be stored automatically in storage. So that the attendance of election participants will be easier to do, faster and avoid human error or fraud in the absence of pilkades
Arduino Based Temperature And Humidity Monitoring Control System for Day Old Chicken (DOC) Cage Sujiwa, Akbar; Ubaydillah, Muhammad
BEST Vol 3 No 1 (2021): BEST
Publisher : Program Studi Teknik Elektro Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol3.no1.3538

Abstract

In general, conventional cattle sheds using manual systems and human labor are very reliable, in the conventional process of heating cattle sheds, we still encounter many using oil stoves and lamps as a DOC heating process. However, the use of oil stoves and lamps is dangerous and unstable. In addition to the DOC heater using the lamp, there is also a DOC heater using an element heater. The advantage of using a heating element, the temperature can be adjusted according to your needs. The use of heating elements in chicken coops is still rarely used. Therefore, a research was conducted on the manufacture of a temperature and humidity monitoring control system based on Arduino Mega in the Day Old Chicken (doc) cage. DHT 11 sensor accuracy level calibrated with room temperature measuring instrument Taffware HTC-2 is known DHT 11 sensor has an accuracy in reading temperature that is 96% with a dispute of 3.8%. And the accuracy in reading humidity is 89.8% with a difference of 11%.
Design of New Normal Health Protocol Reminder Using Arduino Nano and Ultrasonic Sensor Hastuti, Dwi; Zulkarnain, M. Rizqi
BEST Vol 3 No 1 (2021): BEST
Publisher : Program Studi Teknik Elektro Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol3.no1.3536

Abstract

Corona virus is a group of viruses that can cause disease in animals or humans. The most common symptoms of COVID-19 are fever, dry cough and feeling tired. Other symptoms that some patients may experience less often include aches and pains, nasal congestion, headache, conjunctivitis, sore throat, diarrhea, loss of taste or smell, rash on the skin, or discoloration of fingers or toes. The Indonesian government urges the public to maintain productivity even in the midst of the ongoing corona virus pandemic with a new order called the new normal, namely by implementing health protocols. PGRI Adi Buana University Surabaya is one of the places where many people do their activities and gather. The existence of this gathering activity can increase the risk of transmitting COVID-19. To prevent transmission, every academic community must always apply the new normal health protocol as recommended by the government, such as wearing masks, washing hands with soap, and maintaining social distancing. So far, health protocol surveillance activities in the campus environment have only relied on the role of security so that it is less effective considering the limited human ability, so a tool is needed to always remind in implementing the new normal health protocol. The tool is in the form of audio using the Ultrasonic HC-SR04 and Arduino Nano sensors. So every object that passes through the sensor will be processed by a microcontroller (Arduino Nano) and then processed into an output in the form of a buzzer. The buzzer that comes out is a voice to remind everyone in the university to implement health protocols.
Major and Minor Head Losses Analysis on The Piping System in Pondok Pesantren Tahfizhul Qur'an Ibnu Abbas Tarakan Sudirman
BEST Vol 3 No 1 (2021): BEST
Publisher : Program Studi Teknik Elektro Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol3.no1.3535

Abstract

The head loss analysis in this study is focused on the existing piping system at the Ibnu Abbas Tarakan Tahfizhul Qur'an Islamic Boarding School, so that it is known that the flow losses that occur are both major losses and minor losses. The stages taken are; literature review by reviewing several previous studies then continued with data collection on the piping system in Ibnu Abbas Tarakan Islamic Boarding School. The discussion of head losses in the piping system is divided into four parts according to the existing branching of the pipe installation when the water comes out of the pump. Head losses in each section, namely; the first section (A) 0.21 m, the second section (B) 0.47 m, the third section (C) 0.3 m. Whereas in the fourth section, the existing pipe installation is not supplied by water when the water flow from the pump is distributed simultaneously in the four existing pipe branches. The pump is unable to serve the existing pipe installation, if it is flowed simultaneously.
Design of Smart Fuel Station and Management System Based on Arduino and Internet of Things Prijo Sembodo, Budi; Atmajaya, Haris
BEST Vol 3 No 1 (2021): BEST
Publisher : Program Studi Teknik Elektro Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol3.no1.3534

Abstract

Patrol that is distributed to the public must meet the requirement for the quality, quantity and continuity. Pertamina as one of the companies that is responsible for the distribution of patrol to the public through gas stations and must have competent management and services. However, problems arise in the community and even companies in controlling fuel consumption and queues for sales services at gas stations. One solution is to use a station that is connected to smartphone wirelessly and a cashless. Through the "Smart Fuel Station and Management System Based on Arduino and Internet Of Things", that will be able to help the community and companies in controlling their fuel consumtion and making savings. This monitoring tool uses the Arduino ESP8266 which is combined with Internet of Things (IoT) Technology which is displayed on the LCD and the Internet Web. Customers can purchase the patrol at gas stations independently, by connecting the smartphone application with the gas station wireless and purchase and make payments through the application. By having top up the balance on the application to be able to make purchases as needed and the balance will continue to decrease according to usage. The fuel filling station will issue it according to the nominal or the number of liters we choose in the application. Customers can view detailed fuel purchase for place, date, time, amount and total balance.
Photovoltaic Based Automatic Rice Thresher Machine To Help Farmers in Pandemi Covid-19 Imaduddin, Ilmi Rizki; Wahudi, Hendra; Hamid, Nurul; Pribadi, Mahmud; Mahros, Muhammad
BEST Vol 3 No 1 (2021): BEST
Publisher : Program Studi Teknik Elektro Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol3.no1.3493

Abstract

The rice thresher machine is an important part of the rice processing process. Before the harvesting process, the rice fields are drained for 7-10 days before the harvest period by using a sharp sickle to cut the base of the stems, then the harvest is stored in a container or lined place. The low application of cultivation technology can be seen from the large potential gap between production. With the creation of this system, the process of threshing rice from the stalks can be done automatically, so that this system is expected to be able to provide the process of threshing rice from the stalks to be faster, easier, more efficient and safe for workers. data from the presentation of rice tresher slender yields 223.17 S, at puly rpm the average value produced is 32.82 S, with an average voltage of 11 V and an average current of 0.18 A. 9.13 minutes, with initial grain weight of 15 kg with an average threshing yield of 6.6 kg, with a threshing capacity of 42.2 kg / hour. And the current and voltage data on the solar panel and the resulting charging, the highest voltage is 12 V with a current of 1.69 A which occurs at 12.30 Wib.
WATER POWER GENERATOR FOR PUBLIC ROAD ILLUMINATION LIGHTS OF PADI VILLAGE MOJOKERTO solikin, Akhmad; Ilma Suktawan, Rohib
BEST Vol 2 No 2 (2020): BEST
Publisher : Program Studi Teknik Elektro Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol2.no2.3476

Abstract

Electricity problems in rural areas more and more electric power is needed. Until now, power plants that use water turbines are environmentally friendly electricity producers, so the potential for energy from the air needs to be utilized to address the demand for electricity. Therefore, the solution to this problem is to use the "Design and Construction of Hydroelectric Generator for Public Street Lighting". The generator is a source of electric voltage obtained by converting mechanical energy into electrical energy. The generator works based on the principle of electromagnetic induction, which is by rotating a coil in a magnetic field so that the induced GGL (Electric Motion Force) arises. In this thesis, a research is conducted on the Water Turbine Generator in the river in the village area of Padi Gondang Mojokerto as an object of water flow in order to generate electric power to reduce crime in the area in the form of a load object in the form of Public Street Lighting.
AUTOMATIC FISH GRILLER BASED ON TEMPERATURE CONTROLLER Rochman, Sagita; Mukodah, Roib
BEST Vol 2 No 2 (2020): BEST
Publisher : Program Studi Teknik Elektro Universitas PGRI Adi Buana Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36456/best.vol2.no2.3475

Abstract

The automatic fish grill is a tool that is very helpful for food vendors who are processed in a roasting manner. For now, conventional automatic grills that are already on the market have very expensive prices so that many traders still use manual fish grills which are less efficient in the process of doing them. The purpose of making this automatic fish grill design is to help human work to save more time and energy. The automatic fish roasting box is designed with heat absorbers in each layer, equipped with two racks, each measuring 50cm and also equipped with 2 250 watt heaters. From the test results using different types of carp with different weights, it shows that the automatic fish grill works well and gets a 100% percentage result with evenly cooked fish. The economical level of automatic fish grill has a good value, the whole design of automatic fish grill uses good quality materials and materials. For now, automatic roasters on the market have very expensive prices, this difference in price has made many traders not take full advantage of the technology. Because of this problem, researchers created an automatic fish grill based on a temperature controller, which is targeted at an inexpensive price, but can still be used safely and with maximum results. Thus, using a temperature controller-based automatic fish grill design can help simplify work to make it more efficient and safer.

Page 1 of 4 | Total Record : 32